To complete this method for correcting the No Audio Device error, it will be important to ascertain what audio driver software is installed on the computer in order to restore the software on the computer. There are many driver updated software available. I use this computer only for editing home videos which is now impossible without sound therefore I would not be keen on making a full system recovery as I would loose all the updates I needed for my video editing software to be able to work properly and now there is no updates or support is available for this old video editing software. If the option is grayed out, the service should already be started. Windows Audio is so deeply hooked into Windows that a crash is often likely to take down the whole system rather than just your sound.
If the computer continues to see the Audio service disabled on restart, these steps can be repeated to enable the service after computer restart. However, bear in mind that this method is ridiculously tedious: you have to find, download, and install the required software for each of your hardware devices. The process will relaunch when the computer restarts or reboots, unless you also remove it from the Startup folder. Step 8 — Test the Windows application that was throwing the No Audio Device found error to see if the issue has been corrected. Step 4 — Locate the name of the sound hardware installed on the computer. They stripped it down to factory status. Fix your audio drivers No success so far? See the available in Windows 10.
I was was watching a youtube clip and all of a sudden the sound went off. As I have mentioned in the first cause that — the error also can occur if the Driver is disabled. Step 6 — Firmly grasp the sound card and remove from the slot on the motherboard. We look forward to hearing back from you. Another good thing is that it can work in tandem with your main security solution, thus adding an extra layer of security.
Downloading and installing the latest driver for your specific device can fix these types of errors. The solution is same for all version, so you can try these solutions. You can also do it right in Windows for devices that support it. Try with a new sound card to your system and check. So, First I am going to tell you, what cause can be behind this error.
Dwayne Burch I am trying to set up a karaoke system. Then the problem might stem from driver issues. Tip: the Sound dialog can be opened faster using one for the following commands: mmsys. First Cause — Windows has disabled the audio device. Check the file path for the folder. Then you can simply download a driver scanner software.
When this error occurs, there are a number of actions that the computer user can take to correct to include updating the device driver or replacing the sound card. If after trying all software related solution and re-installing the windows. Step 10 — Restart the computer and test the computer application that was throwing the No Audio Device error for proper operation. Did the above work for you? Sound cards as good as on-board sound or better are not expensive. If your audio drivers are corrupt or out of date, they can cause Audio Device Graph Isolation to devour your resources. This is the best solution, which you can try.
And will provide you working solutions. You receive a message that states that a hardware device is being installed, and then the uninstalled audio device appears in Device Manager. In Windows 10, there are a number of options which you can use to change sounds for different system events, configure output and input devices, and more. To change the Default Audio Device, do the following. This utility is an intelligent program which will automatically recognize your computer operating system and device. Installing sound related software or software updates can disable the audio service. Or will i have to go and buy a mircophone? Then you should let Device Manager search for the necessary drivers online.
Solution: 7 Change Sound Card. And, then click on next to complete the setup process. Personally, For every driver related issue, I prefer Uniblue DriverScanner. Simply try to roll it back to the last good configuration. What is Windows Audio Device Graph Isolation? Starting with Windows 10, Microsoft has added the ability to change the output audio device with the Settings app. If the computer does not have the sound capability re-enabled, then proceed to the next method to troubleshoot the error.
This problem occurs due to a number of reasons. Also note that the Windows Audio Device Graph Isolation application only runs with Windows 8, 7 and Vista. Solution: 2 Add Legacy Hardware. Step 1: Verify that a sound driver is installed Without a sound driver, you will not hear sound. Solution: 5 Use Windows Sound Troubleshooter. Then you need to try the next solution. Step 16 — Once the device driver update wizard has concluded updating the software on the target computer, restart the machine.
What is more, you should be really careful when doing that: if you end up installing something wrong, your system can start to play up. When Services snap-in opens scroll down, Check and make sure that following services have Running Status and their Startup Type is set to Automatic. Solution 3: Disable All Sound Effects Follow steps below: 1. So far nothing has worked. Hi stevekate, Thank you for visiting Microsoft Windows Vista answers forum.